Category Archives: Home Improvement

Garage Floor Cleaner Ideas

Garage Floor Cleaner Ideas

unduhanA squeaky clean garage floor always looks better than a dirty one. The grease, dirt, and chemicals make the floor slippery, so cleaning it will ensure that nobody falls down on the hard surface and gets hurt. If the flooring has a covering in which an adhesive has been used like in tiles, then the bonding may become weak with deposits of dirt and grease. So, to protect the floor, you need to clean it.

Stains are quite normal on the garage floor. Regular cleaning of your garage may not be enough for stubborn stains. You may have to give special attention to clean them. Apart from the cleaning products, there are some other chemicals that can be used. Here is a list of some commonly used cleaners that will yield better results.

Trisodium phosphate (TSP) is effective on oily stains on concrete flooring. Make the stain wet by pouring some water on it, and leave it for a few minutes. Add TSP over the wet surface, and keep it untouched for half an hour. Then, scrub with a brush, and rinse thoroughly with water. This chemical is very harmful so you should handle it with care. Wear safety gear like gloves, goggles, and special clothing to protect yourself. Do not let the rinsed water drain out through a storm drain.

Cola works wonders on both oily as well as dry stains. Spread some cola on these marks, and allow it to settle on the stains overnight. Make a mixture of dishwashing liquid and water in a container and rinse the stained areas with it. Then, wash off with clean water.

Baking soda, or an absorbent powder like sawdust, can also be effectively used to remove spots. If it is an oily spot, apply the powder directly on it; if it is dry, make it damp and then put the powder on it. Leave it for some time, and then wash properly.

How to Clean the Floor

Prior to the use of any cleaner, sweep the floor with a stiff broom to get rid of the loose dirt and debris from the surface. Sprinkle a generous amount of cleaning products or solvents on the surface. There are special cleaners available in hardware stores that you can use in order to achieve a good cleaning effect.

If the stain is too stubborn, you have to scrub the surface with a brush or scrubber. Then, wash off using a pressure washer. It is best for cleaning garages, as the force of these washers is very high. They exert considerable pressure on the surface, and as a result even severe and old stains are washed off. A steam cleaner is another good option. Once the rinsing is done, allow the surface to dry completely. If required, repeat the cleaning process once again.

Concrete floor is the most common in garages. It is even more difficult to remove paint from concrete than from mat or tile, as its porous surface tends to absorb the greasy substance, thereby staining it permanently.

Guide to Apply Epoxy Paint to Garage Floor

Guide to Apply Epoxy Paint to Garage Floor

In recent times, the popularity of epoxy paint coating for garage floor has increased manifold, and it can be attributed to its many good points and the fact that it comes in a variety of colors that you can choose from. The durability of epoxy paints has always been talked about and another factor that works in its favor is the fact that it does not allow oily or greasy particles to attach to its surface which makes the paint easier to clean, and thus, ranks it higher than several other types of paints. There are three different types of epoxy paints that are available in the market; water based epoxy, solvent based epoxy, and solid epoxy. The most popular type of epoxy paint for garage flooring in the market are solvent based paints.

Applying Epoxy Paint to Garage Floor

Solvent epoxy paints have an adhesive quality and it penetrates the flooring of the garage easily. But while using this type of paint, it is important that you use proper protective gear, as the fumes of the solvents are extremely harmful. It is also important that after you paint the garage, you leave it ventilated, so that there is no build up of fumes in the garage. Now that you know what precautions need to be taken before taking up a project like this, in the next section we tell you, exactly what steps you need to follow to paint the floor of the garage. In order to apply paint on a garage floor, you will need a paint kit, paint brush, primer, stir stick, metal putty knife, and a pressure washer.

  • First and foremost, it is important that you clean the floor completely to remove the dust and dirt completely. Use the pressure washer to do this. You will also need to remove any paint on the flooring. In order to do this you will need to use a metal putty knife so that any peeling paint can be removed.
  • Allow the floor to dry after you clean it. Next check the floor for any cracks. In order to get a smooth floor, you will need to patch all the cracks. You can use an epoxy crack filler to do this. Ensure that the surface level is smooth and that you allow it to dry for at least four hours before putting on the primer.
  • Before you start applying the paint, you will need apply a primer to the floor. Ensure that you paint in the direction that is along the wood grain and that you smooth out the primer completely. Also ensure that you allow it to dry for two hours before applying the primer.
  • Now start applying the paint. You will first need to mix in the two components of the paint. Use the stir stick to mix it up completely. Once you are sure that the paint is mixed in completely, you can start the process of applying the paint.
  • Before painting the area of the flooring, it may be a good idea to first paint the perimeter of the garage. To ensure that you do not get paint on the walls or the door of the garage, it may be a good idea to use a duct tape to cover it up so that you can get paint till the edges. Once you have painted the sides, you can start painting the rest of the floor. Once you have painted the floor completely, ensure that you do not let anyone enter the garage till you have finished it completely.
  • Allow the first coat of paint to dry overnight or at least for 16 hours before applying the second coat. Also it may be a good idea to add a coating additive to the second coat which allows for non-skid flooring.
  • Allow the coat to dry for another sixteen hours and you can start parking your cars in the garage after a week. It may be a good idea to apply a coat of floor wax if you want a flooring that can be cleaned easily.

Learning to apply epoxy paint is extremely easy. If you have spilled paint on the walls you can use an epoxy thinner to remove the same. Painting the floor of your garage is an easy project that can be easily done over the weekend.

How to Best Garage Floor Coating

How to Best Garage Floor Coating

Garage floors are most prone to spills and stains. No matter how much care and precaution is taken, these are sure to get dirty and greasy. Well, in case if you have installed regular flooring in garage, cleaning the same will become an extremely tough job. This makes use of garage floor coating material important. Once coated with these specially designed materials, garage floors become more durable and easy to clean. They don’t fade off, scrape off or peel due to various chemicals used in garage and do not wear off easily even after high usage. Garage coatings are available in a few types and there are a good number of options in terms of brands in each type of coating. So here’s more about the best garage floor coatings.

Types of Coatings

Well, before we look at what is the best type of coating let us understand the various options available in the market. Coatings are basically available in liquid and solid form. Liquid coatings mainly include stains, paints and epoxy coatings. Solid coatings are usually made of vinyl.

Choosing the Right Coating

You can opt for paints or stains, in case, you want to give a completely new finish to the floors. Concrete stains are a cost-effective solution and offer a long-lasting coverage. These are a good pick if you have unfinished floors and want to finish them in lower budget. Epoxy coatings remain a good alternative while finishing garage floors. Paint colors offer the freedom of having a completely customized look. There are specially formulated paints available in the market for covering garage floors. If you browse through the coatings, you are sure to find a number of epoxy coatings in the list. You need to consider whether you need a high-gloss or non-slip coating. Glossy surfaces are often slippery and might not be suitable for your needs. So choosing the paint or epoxy coatings accordingly is much essential. Here are the details about the top picks in the coatings.

Choose From the Best

Ucoat IT Garage Floor Coating Products
Checkout the entire range of Ucoat IT floor coatings for garages. They have a special line of products for garages and exterior surfaces which not only offers the best surface finish but also makes an ultimate solution for re-finishing damaged and dirty garage floors. UCoat offers commercial grade and environment friendly catalyzed epoxy floor coatings which are specially designed for garage floors and are much easy to apply. You can get their kits which are specially designed for the do-it-yourself minded individuals!

BEHR Premium 2-Part Epoxy Garage Floor Coating
If you are looking for a decorative and high-performance coating then this 2-part epoxy coating is a perfect pick. This is basically a water-based concrete floor coating which offers lasting protection against various elements like brake fluid, motor oil, hot tire pick-up, etc. It is durable and has a slightly glossy finish which won’t fade off, crack, peel off and also withstand harsh chemicals which are much common to the garage floors.

2-Part Epoxy Garage Floor Coating by QUIKRETE
Checkout the category of garages and workshops and you can find a range of exquisite coatings for commercial floors. Let me tell you that if you are planning to give an out-of-the-box look to your garage floors then you must checkout the 2-part epoxy coatings and epoxy multi-surface coating products that are available. Be it a midnight blue effect or a warm wooden feel, your garage floors are sure to look class apart with the variety and options in coatings available in this range from QUIKRETE.

You can follow the coating and painting tips while working on this project. Finding out what is the coating is much easy if you have the list of top products in this segment and also have an idea of the final finish that you desire to have for these floors. Well, reading the expert and consumer reviews is one of the best ways to decide the best amongst the aforementioned and other top rated floor coatings.

Tips to Garage Amazing Flooring

Tips to Garage Amazing Flooring

unduhan-1The garage in the house may not necessarily be a home for your car. More often than not, it is a storehouse for odd junk, or is also converted into a workshop or a game room. However, one ends up using the garage space the way it is, without paying much attention to its decor, more prominently, the floor. But, depending on how one uses the garage space, it makes sense to check out the floor and do it up accordingly.

For example, if the garage has been converted into a game room, then don’t you think that a pleasant carpet on the floor will make it a nicer place?

All things considered, make sure you have a concrete plan detailing the exact usage of the garage. Based on that, several options are available in the market to make the garage flooring better and more suitable to your needs.

Ideas for Garage Floors

Epoxy Paint
If you are using the garage area as a workshop, then it makes sense to use a good epoxy paint to cover up the entire garage floor. This paint is made specifically for floors and won’t peel off from the concrete floor. It will absorb all the oil stains and make the surface appear smooth and shiny. This option should not be considered in case you wish to turn your garage into a playroom, as the paint can make the floor too slippery to play on.

Floor Mats
Floor mats are very useful as they absorb the oil and grease stains, and are non-conductive. This is a very good option for garage floors when you are using the garage as a workshop area. However, floor mats can be more effective, if the garage is used as a play or recreational room. Garage floor mats are easy to install as they are just rolled out over the area of the floor. They come in a variety of shapes and sizes, colors and patterns to suit your needs.

Epoxy Floor Coating
An effective garage flooring idea is using an epoxy floor coating. This is a very popular type of flooring which is extensively used in order to have a professional look. Epoxy coating is highly durable and resistant to tension and acids. Epoxy floors are also known for their skid-proof surface.
Alternatively, you can even think about decorative concrete flooring. They come in a variety of designs that will suit your home design or decor. In areas of cold climates, you can even think about in-floor heating tiles. Having gone through all these options, you cannot rule out the time tested options of vinyl or linoleum tiles for your garage floor. These are also available in a variety of colors and designs.

Depending upon your budget and the time available for this project, you can either install the flooring yourself, or hire professionals for the same. Remember that a good garage floor will not only make your garage appear appealing but will also add value to the look of your house.

Clean Bamboo Floors Tips

Clean Bamboo Floors Tips

From natural light shades to darker caramel hues, bamboo floors are very popular for the beauty they add to a room. Besides their aesthetic value, bamboo floors are esteemed as they are environment friendly. Bamboo plants can grow in as little as 3 to 5 years, and are low maintenance plants. They are used for various purposes, including flooring. After having invested one’s time in choosing and installing bamboo flooring, one would definitely want to see them without a scratch or dent for as long as possible. Following these simple tips on bamboo floor cleaning will help one take care of them on a daily basis.

How to Clean Bamboo Floors

  • Like any wooden floor, bamboo floors are sensitive to excess moisture. Hence, use of excess water while cleaning the floor should be avoided. A dry dust mop or a microfiber flat mop can be used daily to clean the bamboo floor. Even using a vacuum with a soft attachment would be a good option to keep a bamboo floor free of dirt and grit.
  • In case of any liquid spills, or food being dropped on the floor, cleaning it with a soft cloth, dampened with water, would do the trick. However, one should be careful about squeezing any extra water out of the cloth.
  • Wax, wood polishes, solvent cleaners or oil soap should never be used for cleaning bamboo floors. Using floor cleaners specifically made for bamboo floors is the safest option to ensure proper maintenance of such high quality floors.

General Care

  • Avoid walking around with shoes, especially high-heeled shoes, as they are particularly damaging to bamboo floors. In case that can’t be done, keep a mat outside the house to clean the shoes and remove it of the dirt and small stones that get stuck on the soles of the shoes. These stones might leave scratches on the bamboo floor that can’t be removed later. In case there are pets in the house, their claws must be trimmed to avoid excess scratches or gouges.
  • It is always wise to cover areas of the floors that are walked upon more, with mats or rugs. However, one should ensure that the rugs are of colorfast and non-scratch variety.
  • Protective pads should be attached under the legs of all furniture. These pads should be cleaned regularly to keep them free of dust and dirt. Replacing them periodically would also help minimize any damage caused to the floor.
  • Whenever any piece of furniture needs to be moved, it should be lifted and moved. Under no circumstances should furniture be dragged along the floor.
  • Bamboo floors should not be exposed to prolonged periods of direct sunlight. This might cause the floor to lose color and ruin the look. Using blinds and curtains properly will not only enhance the look of the room, but will also protect the bamboo floor from fading.
  • Placement of the rugs and furniture should be changed regularly. If the same area of the floor is covered for long it tends to retain its original shade whereas the other uncovered areas may become lighter in color. Also, moving furniture ensures that certain parts of the floors do not get dented because of the heavy weight of furniture being kept there for too long.
  • Using a humidifier will help manage humidity levels in the room. It is advisable to maintain a 30 to 50% humidity level, as excess humidity may crack the planks, while low humidity can shrink the planks.

Flooring manufacturers usually include care and maintenance tips with their products. In case such recommendations are not available, it is always advisable to contact them to get information on cleaning bamboo floors. Besides that, following these simple dos and don’ts will help one maintain the beauty and the longevity of bamboo floors.

Tips to Choose a Bamboo Floor

Tips to Choose a Bamboo Floor

Bamboo floor is highly appreciated by consumers because of its texture, quality and the advantages it offers. Its stylish and contemporary appeal makes it a good option for remodeling floors. Bamboo is also a wonderful alternative for hardwood floors because the physical appearance of both are same. Choosing a good quality bamboo floor requires some prior knowledge about its types. The price is determined according to its origin and the quality guaranteed by the manufacturer. There are certain important factors that you should consider while pondering on how to choose a bamboo floor. We provide you some good tips on this.

Choosing a Bamboo Floor

You have to scrutinize the pros and cons of bamboo floors before taking any decision. Moreover, the type of bamboo floor that you choose will depend on the interior decoration of your house and the prevailing climatic conditions. The color of the bamboo is another important factor that should be considered. Take a look at those important factors that you must know before installing a bamboo floor.

  • First of all you have to consider the purpose of use while laying a bamboo floor. Indoor and outdoor floors are usually constructed with horizontal or vertical sheets of bamboo while strand-woven bamboo is much preferred for outdoor spaces like a porch or a portico. Bamboo floors installed at outdoors should also be U.V resistant.
  • Avoid carbonized bamboo since they are comparatively softer than strand-woven bamboo, which is known to be the hardest quality of bamboo. The biggest disadvantage of using carbonized bamboo is, it easily gets dented when subjected to pressure. Thus, it is not a suitable option for floors.
  • Strand woven bamboo is probably the best quality bamboo not only because of its durability but also because of its weather-resistant properties. It is manufactured from bamboo strips that are further molded and shredded into strands and then glued with resins. This quality is unique to strand woven bamboo that offers complete protection to the flooring.
  • Since daily activities are carried out on the floor, you must look for durable and scratch resistant varieties. You can also get an additional acrylic coating done on the surface of the bamboo for giving extra protection. Look for moisture resistant varieties, that could be cleaned easily by wet moping. The quality of bamboo should be such that it is capable of withstanding vacuum cleaning.
  • While remodeling your floor with vertical bamboo, you will observe thin strips having fine lines that run between a narrow stalk. This is a characteristic properly of vertical strips and you can easily identify it with these specifications. Similarly, horizontal bamboo strips have three distinct layers, that are stacked with each other. The middle strip is comparatively narrow and sleek while the rest two layers are wide and flat.
  • We often get attracted by the external appeal and come to know the disadvantages only after using. Bamboo floors having light shades could be remodeled easily with darker tones. Thus, the choice of floors also depends upon the texture and color of the bamboo. Check with the supplier regarding the staining options suitable for the product that you are going to purchase.
  • Choosing the color of bamboo floor and determining its staining properties are two different aspects. Although the natural light shade of bamboo has a traditional approach you can still look for different options that will complement the interiors of your house. A few good colors include burnt mocha, rec cognac, coffee brown, Irish moss, etc. These colors have contemporary appeal, which when used in the right proportion beautifies interiors with excellence.
  • If your budget is low, you can temporarily get an unfinished bamboo flooring and then complete the work when needed. There are certain disadvantages of using unfinished bamboo because it’s devoid of protective coating. In order to save some expenses, you end up spending a huge sum merely on repair cost. Thus, go for pre-finished bamboo floors that have been chemically treated to its durability and texture.

Always consult with an experienced person, check out the product reviews and compare the costs before deciding the type of flooring suitable for your home.

Tips to Install Bamboo Flooring on Stairs

Tips to Install Bamboo Flooring on Stairs

While decorating your home, we always opt for the well followed flooring trends in the hope of adding elegance. If you are looking to add something really extravagant in your home, then opt for bamboo flooring. Bamboo flooring is a really graceful flooring option for your house and staircases, which is easy to install as well as maintain. Bamboo flooring is the most affordable and eco-friendly type of flooring which is popularly chosen for stairs and the overall flooring area of contemporary dwellings. It is a relatively easy to clean flooring option for stairs. Trust me, it will definitely add up to the beauty of your dwelling. It is also the reason why many homeowners are replacing their existing carpeted stairs with this utterly oriental flooring option.

If you have made up your mind for bamboo stairs, then the next question on your mind would be how to install it! Well, let me tell you that installing bamboo flooring on staircases needs pretty good knowledge about carpentry, construction and interior designing. Hence, if you are not pretty sure about the job, it is always better to hire an efficient team of professionals. However, you can always refer to the following section of the article for understanding the installation procedure for bamboo flooring.

Installing Bamboo Flooring on Stairs

Preparation
There are two basic ways of installing flooring on stairs. One is by using prefabricated bamboo stair treads and bamboo stair risers, while the other one is by using bamboo stair nose and flooring boards. Although installing bamboo flooring is a safe thing to do, one cannot deny the initial care you require during the process of installation. You need to take care while nailing the boards. You may also need to protect the installed flooring from scratches until you are done with the entire installation process. Now, before moving ahead with the process of installation, you need to estimate about the required material and time for bamboo flooring. It is always better to have all the required material ready with your, beforehand.

Measurements
Now that you have taken the DIY approach to bamboo flooring installation, you first need to take measurements to purchase material. For that, you may need a tape measure so that you can measure width and depth of each step. Once done with it, multiply the measured width into length which will give you the measures of ‘square footage’ of the stair tops. Then is the time to measure rise of each step. Once done, multiply the number with the width to get ‘square footage’ of the risers. Lastly, multiply square footage of the tops and risers to get the accurate square footage of the entire staircase. Now add 10% to the final sum as waste factor.

Material Needed
Before moving ahead with the instructions, you need to gather all the required material for bamboo flooring installation. These materials include: pry bar, a hammer, sandpaper, vacuum machine or broom, various types of saw like reciprocating saw, circular saw, bamboo flooring boards with matching bamboo nosing, (stair nosing: it is the horizontally hanging material, which is present outside the vertical stair risers) pneumatic nailer and flooring nails. As I mentioned above, in order to protect the installed bamboo flooring from scratches, you need to cover the finished steps with cardboard or newspapers.

Instructions
Now that you are prepared with measurements and all the required materials, go through the following instructions for installing bamboo flooring on stairs. If you find them confusing, then it is always advised that one should contact the professionals.

  • If there was carpet on the stairs, then you may need to remove the carpet as well as pry away the tack strips so that you can get a level surface. You also need to remove excess staples, if any. In order to prepare the surface for installing the flooring, sand it down with sandpaper, so that all the bits and high spots on the steps are cleared. Lastly, vacuum or broom the stairs for a clean and smooth surface.
  • Cut away the existing stair nosing, with the help of reciprocating saw. Removal of stair nosing should create a right angle (90 degree) between riser and tread. Make sure that there is no overhanging left. Once you have removed the stair nosing, then is the time to install the risers.
  • Risers are the pieces of bamboo flooring that you will be installing vertically and alongside the face of your staircase. For that, you need to start from the first bottom step of the staircase and work your way up. Cut the flooring pieces in the exact size required, with help of the circular saw. Place it on the step and secure with nails and pneumatic nailer. Keep at least 6 inches of distance between 2 nails.
  • Now is the time to install the bamboo stair nosing. To do that, understand that the nosing should overhang at least 1 inch away from the steps. Keeping that in mind, cut desired size pieces of bamboo nosing and install them carefully on the prepared steps. Nail the nosing with the help of nails and pneumatic nailer. Repeat the same procedure with the rest of the steps.

Once you are done with installing all the risers and nosing, you may like to install stair stringer along the base of the steps. This will definitely accentuate the look of your newly installed bamboo staircase flooring. As I am saying it repeatedly, if you are not too confident about the DIY way, then do hire qualified professionals! All the best!

Floating Bamboo Flooring Ideas

Floating Bamboo Flooring Ideas

Bamboo flooring is a smart and creative option for home and office flooring. Walking on bamboo floors feels great due to its smooth and polished texture. This flooring is available in many designs, colors, and styles. It gives a wide choice for those who wish their wall and floor patterns to sync well. There are many types of bamboo flooring like floating, carbonized, engineered, natural, or strand woven. Out of these, the floating and strand woven bamboo flooring are in great demand.

In case of floating flooring, the floor is not nailed or glued to the sub-floor, instead, just placed over it. It can be installed in homes and offices and also in places like theaters, gaming rooms, party floors, etc., as it helps to reduce the effect of noise. Preferably, it is not installed in bathrooms as water can seep through the edges and get accumulated under the floor, thus causing damage to the shock-absorbing layer in the middle.

Floating Bamboo Floor

In this flooring, the bamboo planks are not attached physically to the sub-floor. Instead, they are attached to each other by water glue or sometimes just interlocked and placed over the sub-floor as a single unit. The sub-floor can be made up of any normal flooring material like concrete, tiles, or wood. A layer of plastic and foam is placed in between the sub floor and the single unit made out of the planks. Corks made of recycled car tires can also be used as the middle layer, since it acts as a better shock-absorbing material. Bamboo has the tendency to expand and contract with changes in humidity. The same applies to the bamboo planks which make up the flooring. It has an advantage over the usual bamboo flooring. Since the planks form a single unit and are not attached to the sub-floor, they do not bend out of shape. Even so, it is advisable to maintain a half or one inch distance from the edges of the walls or cabinets to allow its normal expansion and contraction process.

Strand Woven Bamboo Floor

It is the most exotic and the most cost-effective option of bamboo flooring. It is made from Moso bamboo, which is boiled to remove any sugar content that can attract termites and then dried for a long period of time. After drying, the strands are flattened under high pressure so that planks can be cut from them. Then, they are treated with low VOC (volatile organic compounds) adhesives. This makes the strand woven bamboo twice as strong as the normal one. It is more moisture-resistant than the regular bamboo flooring. Hence, the planks can be nailed or glued directly to the sub-floor or installed as the floating type. Another advantage of strand woven bamboo is, that none of it is wasted. Every bit and piece of the strand is used in the flooring. It is extremely strong and durable which makes it suitable for installation in heavy activity areas.

Bamboo flooring installation is easy and can be done without any professional help. Though it is a little tricky due to the moisture factor, it is manageable. It has a few advantages and disadvantages. In spite of the disadvantages, many people opt for this flooring due to the aesthetic value it adds to the surroundings.

Tips to Cleaning Prefinished Hardwood Flooring

Tips to Cleaning Prefinished Hardwood Flooring

Every person dreams of a perfect home, and does every possible thing to turn that dream into a reality. We carefully monitor every single aspect of our house and choose the best of things to make it look beautiful. One such aspect that comes into consideration while designing a house, is the flooring. One can have a prefinished hardwood flooring to add elegance to the house. It is a flooring with a polyurethane coating. As this coating is applied before the flooring is sold to you, it is called “prefinished”. A prefinished hardwood flooring is an investment of a lifetime, and its maintenance is important if we want it to have a long life.

Tips to Clean Prefinished Hardwood Flooring

A soft broom can be used to swipe out the dirt and debris on the floor. Regular sweeping of the floor will prevent the dirt from getting accumulated for a long time which will be difficult to clean later.

A light vacuum cleaner can also be used to render the floor dirt-free.

Use an appropriate floor cleaning solution. The hardwood floor manufacturer can give you the idea about the best suitable cleaner for your floor.
Water-based cleaners can be used on a well-finished floor which has four coats of water-based finish, or three coats of polyurethane. This type of cleaner is safe and easy to use.
Use a neutral pH cleaner, instead of a low or high pH floor cleaner. A high pH cleaner easily removes oily stains and grease, while a low pH cleaner is best for cleaning water and mineral deposits. Even though these cleaners are good, their extreme pH results in a dull floor. A neutral pH cleaner is mild and balanced, and removes oily as well as mineral deposits without causing any harm to the hardwood floor.
A neutral pH cleaner should be used only after the floor finish is cured. It takes around a month for curing a polyurethane coating, while a water-based finish is cured in around 2 weeks.
When you don’t want to use a floor cleaner, damp mopping can be done. Dip the mop in a bucket of water. Wring, to dry it completely and mop the floor.
Floor refresher is another option to maintain a prefinished hardwood floor. It helps in reviving the dull areas on the floor.

Steam cleaning is another way to clean your hardwood floor and is one of the best ways of cleaning.

Pay special attention to corners of the room as these places are easily ignored.
Kitchen floor should be cleaned frequently to maintain hygiene. Flooring of other rooms can be mopped once a week, but don’t avoid swiping your floors with a broom once daily, so that dirt does not accumulate in your house.
Mix few drops of dish washing liquid in water. Dip a sponge mop in the mixture, wring it completely and clean the floor. You need to wipe the floor with a damp mop after you finish cleaning with the sponge because dish washing liquid leaves a film on the flooring, if not damp mopped. It is better to use a proper floor cleaner, rather than a dish washing liquid as it is not a preferred product.

To remove hard stains, take a small amount of floor cleaner on a piece of cloth and gently rub on the stain to remove it gradually. Do not be harsh while removing the stain.

Buy a prefinished hardwood flooring kit containing a mop, a washable mop pad, and a floor cleaner for easy cleaning.

Precautions to be Taken
► Never wet mop your hardwood floor as water is a strict no-no for it.
► Never use soap or detergents to clean your prefinished hardwood floor. Instead, invest in a recommended cleaner to avoid any damage.
► Do not use ammonia on the floor.
► Do not wax your polyurethane finished flooring.
► Read the directions of use properly, before using a floor cleaner.
► Always use a floor-specific cleaner.
Hardwood flooring is difficult to maintain than other types of flooring. However, if one cleans and maintains it regularly, there will not be any issue. Now that you have gone through the tips and are also aware of the precautions to be taken while cleaning, it will not be a difficult task for you to maintain a clean and shiny hardwood floor for many years.

Clean Teak Floors Tips

Clean Teak Floors Tips

Teak flooring is one of the most beautiful, classy and exotic flooring that has the ability to sort of make the look of the entire room absolutely serene and classy in its own way. Among the many types of hardwood floors that exist, teak flooring is considered to be one of the most durable and low maintenance options to choose from. Teak is a tropical wood that is widely used for the purpose of construction and interior designing, just because of its extraordinary durability, appearance and finish. However, even though it is absolutely low maintenance and long lasting, you still need to keep in mind some simple points when it comes to cleaning teak floors. There are specialized teak cleaners available in the market that are very effective for the same purpose. The following section will tell you about some simple caution and care that you need to give to your teak flooring for an everlasting shine and radiance.

How to Clean Teak Wood Floors

Because of the elevated demand of teak wood for various purposes, it is becoming all the more exotic and rare. Therefore, consider yourself lucky to be the proud owner of a teak wood floor and make every possible effort to make sure that you do all that you can to increase its shine and durability. It is very simple to clean and maintain it, provided you know what to do and how. Have a look at the following tips to clean your teak wood flooring.

Teak Cleaners
Using cleaners that are specially designed for this purpose prove to be very helpful when it comes to getting rid of the mildew and the molds that can actually form on the floor and cause black spots on them. There are two kinds of cleaners that are available in the market. These are one part cleaners and two part cleaners. One part cleaners are more gentle in nature and require a lot of ‘gentle’ scrubbing (for 10-15 minutes). On the other hand, two part cleaners are a little harsh as the first part contains application of acid, followed by slight scrubbing, followed by a neutralizer to clean up the leftover acid. These are very effective in cleaning of the mold and mildew spores that can damage the wood flooring.

Vacuum Weekly
Using cylinder vacuum cleaners would prove to be very effective for the purpose of cleaning your teak flooring. This is because these vacuums are specially designed to clean hard flooring and they use powerful suction to clean off the dust and debris which tend to make the flooring look dull. We need cleaning options that are gentle on the floor and these vacuums do exactly what is needed.

Mop Regularly
Mopping is probably one of the best teak cleaning methods when it comes to the basic cleaning. Using plain water and using a damp (not wet) mop and gently rubbing it all over the floor is all that it takes to clean your teak floor to prevent the accumulation of dust particles on the floor. Using a vee sweeper mop or a push mop is something you can go for in order to clean hardwood floors.

Other Tips
While the cleaning part for teak flooring is pretty easy, you just have to make sure that you are gentle with it when it comes to cleaning and maintaining. Well, apart from the aforementioned tips, some other teak cleaning and maintenance tips for your floor would be:

  • Avoid using harsh items or materials on your teak floor. This includes wearing normal footwear which doesn’t include highly pointed heels. Even your furniture legs should have cover pads so that their movement doesn’t harm the flooring.
  • Use a humidifier during winters as it helps reduce the shrinking of the wood and also prevents the build up of molds.
  • Never mop the floor with a completely wet mop as the water may make the wood swell up and lose its luster and shine.
  • To maintain the luster and shine of the teak wood, you can also apply teak oil on the floor at least once in a year. Though it doesn’t affect the durability of the wood, it is a good option for cosmetic purposes.
  • Buffing the floor once in a while will also help lift up the dust and get the luster and shine of the wood back to a great extent.

I hope these tips helped you with identifying the approach that should be taken to clean your teak wood floors. There are many pros and cons of teak flooring based on which the products are specifically designed to clean teak floors. So make sure you don’t go for any products that are designed for non-wood floors. Just be a little cautious and regular when it comes to cleaning your teak floors so that they don’t lose up on their shine and continue to make your living space look as beautiful and radiant as possible.